SMITH CR-7/8-X-SS Cam Follower and Track Roller - Stud Type

Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing I.D. d(mm):17; Shape:T-Shaped; Mount Type:Base Face Type; Number of Bearings:Single; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; RoHS:6;

Bearing Inner Dia. Shape:Tapered hole adapter; Bearing Unit, Type:Take-Up Type; Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):40700; Seal:Silicone; Bearing Inner Dia. Shape:Tapered hole adapter; d:35; Rolling Element Material:Bearing Steel; RoHS:6; Bearing Unit, Type:Take-Up Type;

Roller Type:Flat Type; Tightening Method:Hex Socket on Thread; Shaft:Provided; Volume Discount:Available; Allowable Rotational Speed(rpm):1390; Roller Lining:With Resin; Roller Type:Flat Type; D:30; B:14; Material:[Carbon Steel] 52100;

Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Housing Material:[Aluminum Alloy] 201; Number of Bearings:Double; Volume Discount:Available; Shape:Flange Type; Type:Bearings with Housin; RoHS:6; Flange Shape:Round Type;

Bearing Part Number:6000; Number of Bearings:Double; Seals:ZZ (Double Shield); Type:Bearings with Housin; Shape:Flange Type; Shape:Flange Type; Days to Ship:8 Days; RoHS:6; Bearing Material:Stainless Steel; Type:Bearings with Housin;

Designation of housing:FD207-; A:22 mm; s1:30.2 mm; Weight:0.98 kg; e:12.4 mm; S:9.5 mm; C:25.7 kN; G:R1/8"; d1:51.1 mm; B:25.4 mm;

Bearing Used:Deep Groove Ball Bea; Width T(mm):12; Height Indication:Height Selection; Height H(mm):20 ～ 30; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Days to Ship:8 Days; Seals:ZZ (Double Shield); Holder Surface Treatment:Not Provided; Shape:T-Shaped;

da min:41.5 mm; Brand:NTN; ra max:1.5 mm; r1s min:1.1 mm; Dynamic load, C:99 kN; E:70.2 mm; Characteristic outer ring frequency, BPF0:5.16 Hz; F:46.2 mm; Radial clearance class:C3; Max operating temperature, Tmax:120 °C;

S:30.9 mm; C:52.5 kN; A5:30.9 mm; C0:32.8 kN; P:300 mm; Weight:1.87 kg; T min.:-20 °C; B:61.8 mm; SW:5 mm; d1:82 mm;

maximum loads 180°:90 kN; m2:252 mm; n1:48 mm; g:51 mm; sealing TA:SC 213 TA; P 150°:132 kN; diameter dowel pins:6 mm; d1:75 mm; u:18 mm; P 55°:345 kN;

Minimum Buy Quantity:N/A; Cage Material:Steel; Brand:NTN; da min:21 mm; Min operating temperature, Tmin:-25 °C; Harmonized Tariff Code:8482.10.50.68; Other Features:Deep Groove | Rubber; Keyword String:Ball; Nlim (grease):12,000 rpm;

S:14.3 mm; C:14 kN; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; N1:16 mm; A1:12 mm; A5:19.7 mm; L3:51 mm; H2:51 mm; H:89 mm;

Stroke:No; Surface Treatment:No; Pillow Type, Category:Standard; Bearing Unit, Type:Pillow Type; Fit:J7; Surface Treatment:No; Unit Body Material:Cast Iron; Grease Type:SH44M; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel;

Dynamic Load Rating:8740 lbf; Static Load Rating:5210 lbf; Bearing Number:GYE50KRRB SGT; Slot Width A1:27.00 mm; Dimension G:2.559 in; Adjustment Screw Bore N:28.6 mm; Pitch Height H1:100.8 mm; Center of Bearing from End S:32.50 mm; Total Length L:150.8 mm; Seal Type:Shroud Seal;

Bearing Retained:Yes (with retaining; Height H(mm):40 ～ 60; Housing Material:1045 Carbon Steel; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):20; Width T(mm):15; Type:Bearings with Housin; Holder Surface Treatment:Black Oxide Coating; Days to Ship:8 Days;